BlackPak Pro Divider System - Offset

The YakAttack BlackPak Pro is a great addition to any fishing kayak.  However, keeping your tackle boxes, tackle and other gear organized and easy to reach can be a challenge.  This system is designed to allow you to customize the storage to hold what  you want, where you want.  The items in this set are designed to allow you to equally divide the BlackPak or ShortStak.  This means that the dividers will run down the middle of the internal square grid.  If you would like to have the dividers match the internal square grid, please see our other set here. 

Fitment:  We suggest you load up your gear and then estimate how many "squares" inside the box you need to divide the gear up.  Typically, tackle boxes are larger than the gap between two slots but they will fit between three slots.  However, to be more efficient, you can most likely fit two tackle boxes between four slots (see photos and videos).  Please reach out and we are more than happy to help you decide what you need for your gear to fit well.  You can use these linked documents to draw out how you'd like to divide your space:  16 x 16   16 x 13   13 x 13

• Slot mounts are sold in pairs and come with 2 screws for each slot mount for mounting. 
• Dividers are sold individually.
• Dividers include a set of single offset slot mounts of the same color. unless otherwise requested.

Note: Dividers in colors other than black and orange may take additional processing time.  Please contact us for custom requests and we will do what we can to accommodate.

System Components:

4 Slot Offset Mount - Set of 2 - Four divider slots offset halfway between the mounting holes inside the BlackPak Pro.  While the space between slots is the same as the 5 Slot, this version gives a little more room between the outside walls and the slots.

Single Slot Offset Mount - Set of 2 - Similar to the 4 Slot Offset, this slot lines up between the holes inside the BlackPak Pro.  These are great in combination with the Single Slot to allow different spacing for tackle boxes and gear of different sizes.

13" BlackPak Divider w/ 2 single offset slot mounts- Just under 6" tall, this divider is sized to go across the 13" side of a 13x13 or 16x13 BlackPak Pro.  These dividers are notched to allow combination with other dividers to create multiple "compartments".  

13" BlackPak Divider No Slots w/ 2 single offset slot mounts- Just under 6" tall, this divider is sized to go across the 13" side of a 13x13 or 16x13 BlackPak Pro.  These dividers do not have the cross-dividing notches but do allow for a little more rigidity for holding tackle boxes in place.  You will not be able to cross-divide the box with these dividers.  Contact us if you're interested in getting your logo or name engraved on the dividers.

16" BlackPak Divider w/ 2 single offset slot mounts- Just under 6" tall, this divider is sized to go across the 16" side of a 16x16 or 16x13 BlackPak Pro.  These dividers are notched to allow combination with other dividers to create multiple "compartments". 

16" BlackPak Divider No Slots w/ 2 single offset slot mounts- Just under 6" tall, this divider is sized to go across the 16" side of a 16x16 or 16x13 BlackPak Pro.  These dividers do not have the cross-dividing notches but do allow for a little more rigidity for holding tackle boxes in place.  You will not be able to cross-divide the box with these dividers.  Contact us if you're interested in getting your logo or name engraved on the dividers 

13" ShortStak Divider w/ 2 single offset slot mounts- At 3.5" tall, this divider is sized to go across the 13" side of a 13x13 or 16x13 ShortStak and is a little shorter to fit within the lid.  Using these in the ShortStak is a great way to subdivide the space to hold smaller gear and tackle.  These dividers are notched to allow combination with other dividers to create multiple "compartments".  

.

16" ShortStak Divider w/ 2 single offset slot mounts- At 3.5" tall, this divider is sized to go across the 16" side of a 16x16 or 16x13 Shortstak and is a little shorter to fit within the lid.  Using these in the ShortStak is a great way to subdivide the space to hold smaller gear and tackle. .  These dividers are notched to allow combination with other dividers to create multiple "compartments".  

13" ShortStak Divider Box Height w/ 2 single offset slot mounts- This divider is sized to fit just under the lid and  go across the 13" side of a 13x13 or 16x13 ShortStak and is a little shorter to fit within the lid.  Using these in the ShortStak is a great way to subdivide the space to hold smaller gear and tackle.  These dividers are notched to allow combination with other dividers to create multiple "compartments".  

16" ShortStak Divider Box Height w/ 2 single offset slot mounts- This divider is sized to fit just under the lid and go across the 16" side of a 16x16 or 16x13 Shortstak and is a little shorter to fit within the lid.  Using these in the ShortStak is a great way to subdivide the space to hold smaller gear and tackle. .  These dividers are notched to allow combination with other dividers to create multiple "compartments".  

Note:  The notches on these dividers are spaced to work with other Offset Dividers and Slot Mounts only.  Please view the video below for more information.  Please view our other listing for the Standard Divider set here.