Old Town PDL Front Seat Riser System

Made for the Old Town PDL models, these spacers let you easily find the right height for your comfort.  The combination of the spacers with the OEM seat rail make it super easy to change heights.  

Please watch the included video that goes over this system.  We are currently limited at 2" height due to hardware availability but you can use non-stainless hardware to achieve higher seat placement.  However, typically less than 2" or so is adequate for most people for a front riser.  Due to lack of interest, the option of wood spacers has been discontinued.

NOTE:  The front risers use #10-32 which is a different thread pattern from the rear seat risers.

Hardware that comes with each system will only work for the system height ordered.  However, these use somewhat common #10-32 stainless hardware.  Most hardware stores have hardware in this thread pattern but it may not be available stainless.  If you would like an assortment of hardware with your order, please contact us.

If you would like additional hardware to try out different seat heights, we have added extra screw sets.  These are completely optional as the risers/spacers come with the necessary hardware for the height chosen

Each set includes:

• 1/2" System - Pair of spacers and hardware to set up at a 1/2" height.
• 1" System - Four spacers and hardware to set up at a 1" height.
• 1.5" System - Six spacers and hardware to set up at a 1.5" height.
• 2" System - Eight spacers and hardware to set up at a 2" height.
• 1/2" Spacers Only - One pair of spacers only.  No other hardware or risers included.
• 1" Spacers Only - Plastic Only - One pair of spacers only.  No other hardware or risers included.
• Extra 1/2" Screw Set - Set of 6 screws to set the risers at 1/2" high
• Extra 1" Screw Set - Set of 6 screws to set the risers at 1" high
• Extra 1.5" Screw Set - Set of 6 screws to set the risers at 1.5" high
• Extra 2" Screw Set - Set of 6 screws to set the risers at 2" high